Description

 

Compatible:

Two factors will show if your vehicle is OBD II compliant:

1. There will be an OBD II connector, and

2. There will be a note on a sticker or nameplate under the hood stating “OBD II compliant” or “OBD II Certified”.

Savana, have special interface, may not compatible with this product, and we suggest :

 

HUD A200

Decription:

Model: hud a200

Brand: GEYIREN

Color: Black

Language: English

Environment temperature: -40c- + 80c

Atmospheric pressure 86-106KPa

Relative Humidity: 10% -95%

Environmental noise

Alarm sound level: “= 30dB (A)

Working voltage: 9V ~ 16Vdc (12Vdc / 400mA)

HUD Size: 9*5.4*1.2(cm)

HUD Weight: 40g

Package size : 17*15*3xcm

Package Weight: 270g

Cable Lrngth: 1m

HUD Main Features:

1.Plug and Play connectivity with any OBDII or EUOBD capable vehicle;

2. Screen 3.5 inch HD display

3.Multi-color design makes the screen more abundant and easier to read

4. Nano-technology to eliminate double reflections,more clear.

5.Rich Contents: speed,RPM,water temperature,voltage,low voltage alarm,high water temperature alarm,over speed alarm, fatigue driving alarm,freely switch between kilometers&miles.

6. Auto power on/off: HUD start and off with vehicle started and shutdown, effective protection of the car battery;retaining the manual switch mode,more easy to control HUD.

7. 5-level brightness adjustment,automatic and manual brightness adjustment mode

8.Automatic and manual adjustment for high water temperature alarm

9.Automatic and manual adjustment for low voltage alarm

10.Automatic and manual adjustment for fatigue driving alarm

HUD Display Packing

1x A200 Head Up Display

1 x Reflective Film

1 x OBD Cable

1 x Antiskid Pad

1 x English User Manual

 

Solution for Common Problems

1.The screen without any display,and no electricity

Start the car engine;check if the OBD cable line is tight;please pull down the OBD cables more times to ensure;check if HUD power switch turns on. If no display still,please change another car to test, analyze whether the car OBD diagnostic interface is good, if it is not good,please repair it and try again.

2.When HUD power on, HUD only shows the car voltage and be automatic power off after 30 seconds driving.

HUD just available for cars with OBD2 agreement and EU-OBD agreement（European region: after 03 years, Other region:after 07 years）

HUD Products donnot support JOBD and OBDI and recommended test for another car.

3.See not clearly when HUD under the sunlight,and with double reflection.

Check whether the HUD host surface protective film is torn,and please stick the reflection film on the windscreen.And vertical press in the setting button for 5 seconds to enter into menu setting when HUD is power on,short press 2 times to menu 2,adjust the parameter to 5,vertical press in 5 seconds to save.

4.wrong operation lead to crashes. Or inaccurate datas

Do a reset setting.

5.Inaccurate Speed

a.First check the speed unit is correct or not, the speed unit including KM/H and MPH, short press in the wave button to switch between KM/H and MPH

b.When HUD is power on,vertical press the setting button for 5 seconds to enter into the menu options, find menu 1,the parameter shows 107,up or down the setting button to increase or decrease the value according to the difference until it shows correct one.After adjustment, vertical press in 5 seconds to save it.